As a family owned and run business for over 20 years, we have always strived to meet and exceed customer expectations and our online reviews prove it. We love happy customers! Our staff is experienced, professional, polite and work quickly. Above all, we commit to honesty in our dealings with every customer. Our evaluation of your needs will be based on what is best for you – not us. No “running the bill” with unnecessary items.
We know your time is valuable so we will schedule your appointment to within a ½ hour so there is no need to wait around for hours.
Garage Doors – Free Estimates!
We serve both new construction and the residential garage door replacement markets.
From very affordable garage doors to luxury high end custom garage doors, whatever your budget we can help. With today’s front drive garages, a new garage door can add significant curb appeal and value to a home at minimal cost. We have a full range of garage doors including traditional, carriage house, craftsman and modern, contemporary styles in the material of your choice. Whether steel, aluminum and glass, composite, fibreglass, or real stain grade doors in the wood species of your choice, we’ll help make your home look beautiful! Our respected manufacturers include Steel-Craft, Amarr, Clopay, and Equal Door. Of course, most all our doors are insulated for our Canadian climate and for security and safety we choose to carry only quality products. No flimsy doors here – many are backed by limited lifetime warranties.
Helpful Tips For Maintaining Your Garage Door And Opener
Garage Door :
We recommend performing the following inspections every 6 months:
(a) Check lift cables and rollers for visible signs of wear (cable fraying, roller bearings loose or sloppy). Never attempt to adjust or replace the springs, cables or bottom roller brackets yourself as all of these components are under extreme tension and serious injury can result. Call us if you notice any problems with these items.
(b) Check the balance of the door. Start with the door in the closed position. Pull the emergency release rope to disengage the door from the electric opener. Open the door by hand half-way and release. The door should move easily and stop in a balanced position at the half-way point. If the door wants to drop down or open up by itself from this point either the springs need to be adjusted or they are the wrong springs for the door and should be replaced. Note: all springs are under extreme tension and should only be adjusted by a qualified door mechanic. Serious injury can result if adjustment is attempted without the proper tools and knowledge. A well balanced door should not weigh more than 3 to 4kg.
(c) Lubricate the moving metal parts on the door (roller bearings, hinges and springs). Do not lubricate tracks as this is not necessary and will only attract dirt affecting performance. A spray lube is the easiest to use. You may also use a motor oil like 10W30 and wipe off excess oil with a cloth.
Electric Opener :
We recommend performing the following inspections every 3 months for safety reasons. Electric openers are capable of producing significant force when opening or closing your door and if not properly adjusted can cause serious injury or death from being hit or trapped by the moving door.
(a) Check the automatic safety reverse sensor on your electric opener. While door is closing grab bottom of door when it is about 1/2 way closed. Door should stop and open back up. If the door is very hard to stop or can't be stopped at all, adjust the down force sensitivity adjustment knob to a lower number (some brands don't have numbers and will say increase or decrease sensitivity - in this case you want to increase sensitivity). Re-perform reversing test until door reverses properly. Please note that if the sensor setting is too sensitive the door may reverse under normal operating conditions, if it is not sensitive enough the door will not be safe to use. If you cannot get the reversing sensor to activate the door is not safe to use and you will require a service call to have your opener repaired or replaced.
(b) Place a 2x4 on the floor under the door laying flat. Use the electric opener to close the door. The door should reverse and open upon contact. If the motor keeps trying to close the door after contact re-check sensitivity adjustment. If the door stops on the obstruction it may not be set to close far enough. Adjust the down limit to close the door further. This adjustment should be made without the 2x4 in place so you can see when the door is closed far enough to seal properly on the floor. Re-do 2x4 test after making this adjustment.
(c) In addition to the sensitivity adjustment, newer door openers are equipped with infra-red photo-eyes as an additional safety feature. If these eyes are blocked by an object, or if they are bumped out of alignment your door will not close from your remote controls. You will still be able to close it by using constant pressure on the wall button. In either case the opener thinks something is in the way and will not allow the door to close. Remove the object or re-align the sensors.
(d) The procedure to re-align the sensors is as follows: determine which eye is the sending unit by putting your hand in front of one of the eyes. If the light stays on it is the sending eye. If the light goes off it is the receiving eye (this eye will only light up if it is receiving a signal from the sending eye). Move the eyes until they are pointing directly at each other. Pay close attention to the light on the receiving eye. When it comes on with a steady glow (not dim or flickering) it is receiving a strong signal. Try closing the door with your remote and your problem should be solved!
Feel free to call us with any questions you may have at 543-6900 or email us at email@example.com. (Calgary, Alta. Canada only)
Electric Door Openers :
Garage door openers have become technologically advanced in recent years, some models even linking to your smart phone.We are an authorized Chamberlain Liftmaster dealer and carry their full line of products.
Garage Door Service :
Whether you’re looking for general maintenance or repairs to a broken garage door or electric door opener we can help. There are many parts that work together to lift a garage door and keep it running smoothly, such as the springs, rollers, cables, tracks, hinges and safety sensors to name a few. When a garage door isn’t working properly not only is it inconvenient, it can also become dangerous. These repairs are not for amateurs and serious injuries can result from loosening the wrong bolt (among other things).
Services Offered :
The Door House offers the following services related to garage doors and electric openers. We stand behind our work with a 1-year service warranty on all our labor. This is in addition to the manufacturer's warranty on any parts supplied.
We supply and install parts for most makes of garage doors and openers including replacement door springs.
Garage Door/Opener Tune-ups :
If your door isn't working very well it may work like new again with a few simple adjustments. We will inspect your door and make any minor adjustments or repairs necessary for a minimal fee. Door springs lose tension over time and need to be re-adjusted periodically. We will also lubricate any applicable parts. WARNING: Springs, lift cables and some other components are under severe pressure and can cause serious injury or death. Never attempt adjustment yourself.
To Book a service call, call us at 403.543.6900 or email us at: firstname.lastname@example.org. (Calgary, Alta.Canada only)
- Parking available